THREADING A FLUORO LEADER INTO HOLLOW CORE BRAID

 

Threading fluorocarbon or mono into hollow core braid produces an extremely smooth and strong connection.  One item to pay particular attention to is the diameter of your leader material.  For example I was threading 100 lbs Nomad fluoro into 100 lbs hollowcore. I used a Daho threading needle rated for 80 to 100# mono.  The Nomad fluoro had no issue going into the needle.  When using 100 lbs Berkley Vanish it wouldn't feed into the needle.  Upon inspection the diameter of the Berkley was larger than the Nomad fluoro.  If your in a bind, use a small piece of sandpaper and reduce the diameter on about 2 to 3 inches of the fluoro.  This small section should feed into the needle very tight.  Since the fluoro is extremely tight inside the needle, it should remain inside until you run it inside your hollow core.  So, make sure you check the diameter of your leader material and verify it is within the threading needle specifications.

Brazil eVisa

 

Beginning April 10, 2025 passport holders of the USA, Canada, and Australia will need an eVisa to enter Brazil. The application can be found at www.brazil.vfsevisa.com.  Click on "Apply eVisa now".  You will enter your email and be sent an OTP code to register.  The application is easy to follow.  You will be asked to download a clear photo of the data page of your passport, a recent photo, and travel tickets if already purchased.  They are very strict on the downloaded photo.  It must be 2 in by 2 in and have a snow white background.  Any tint or size issues they will send you an email to correct the photo.  I had to do this once as my original photo was blurred.  After correcting the photo my 10 year eVisa arrived the following day.  The cost of the eVisa is $80.90 and good for 10 years for USA citizens.  You are required to print a copy of the eVisa and present it upon arrival. Brazil recommends you apply at least 2 months in advance in case you have issues.